Dock Lifts

Copperloy Dock Lifts line up a load to any truck bed height with the push of a button. Designed for permanent installation or portable use, their heavy- duty, solid-steel construction and powerful hydraulics handle loads up to 25,000 lbs. safely and efficiently. With up to 60" of vertical travel, a Copperloy dock lift will be a great addition to your loading dock equipment and will accommodate even the highest trucks.

PDF of Copperloy Dock-Lifts

PDF of Dock Lift Specifications

Dock Lift Features

Overview

• Designed for long life and dependability.
• Solid-steel scissors lift provides exceptional stability.
• Pit-mounted units, all rollers are captured to prevent upending.
• All running surfaces have a steel tread plate to for sure footing.
• Long leak-free life with piston-type hydraulic cylinders with hard-chrome plated and polished rods and polyurethane seals and wear plates.
• All pivot pins are turned, ground, polished and hard-chrome plated.
• The pressure- compensated hydraulic lift valves assure smooth starts and stops; with even, controlled motion and allows for manual lowering of the lift during power failures.

Dock Lift Electrical Component Features

• Contained in NEMA 4 and NEMA 12 enclosures to keep dust and moisture out and are fuse protected.
• DU maintenance-free bearings on all pivot points minimize wear and eliminate the need for greasing.
• Removable pins simplify removal of cylinders and scissor legs and a maintenance strut is provided to keep the Dock-Lift raised during hydraulic servicing.

Pit-Mount Dock Lift Features

• Handles everything from hand carts to lift trucks.
• Available in standard capacities from 5,000 to 25, 000 lbs., to accommodate everything from hand carts to powered pallet jacks to lift trucks. Higher capacities are also available.
• Pit-mounted lifts are flush with the grade when fully lowered, and they are protected from accidental damage caused by careless truck operation.

Pit-mounted Dock Lift Design

• Rugged platform.
• Heavy-duty reinforced platform engineered for minimal deflection while raising and lowering lift table
• Positive stop blocks eliminate platform deflection.

Surface-Mount Dock Lifts

Makes any concrete surface a loading dock. You can have a loading dock anyplace you need one, as long as the roadway surface will support the dock lift base without deflecting. There is no pit required.

Standard Dock Lift Features

• Available with capacities up to 5,000 lbs.
• Adequate to accommodate hand carts, 4-wheel carts and pallet trucks.
• Heavier capacities are available for special applications.

Surface-Mount Dock-Lifts

Our Surface Mount Dock Lifts are equipped with the following features.

• Optional flip-down wheels for transportability to new locations, using a removable dolly handle.
• Special bridge and ramp plates are available to adapt the dock lift to your application.
• The approach ramp and bridge plate can be factory-located to accommodate right-angle loading.

Dock Lift Warranty

Our Dock Lifts are warranted for a period of 5 years against defects in workmanship and materials on all structural parts, six months on hydraulic cylinder seals, six months on electrical parts and one year on the hydraulic power pack.

© 2004 JH Industries, Inc. | Sitemap