Edge of Dock

EOD Front 2An edge of dock leveler from Copperloy is ideal when trucks are backing to a dock. With a simple pull of the handle the dock board will lift over the truck height for easy positioning. The mechanical material handling dock leveler mounts easily to most docks, and is available in 66″, 72″, 78″ and 84″ widths. Our edge of dock leveler is capable of servicing trucks 5″ above or below dock levels. This EOD leveler is available in both 20,000 and 30,000 lb models.

When dock space is limited or the working range of a full-size, pit-style EOD leveler is not needed, rely on an economical Edge of Dock leveler. Each Copperloy edge of dock leveler is available with Hydraulic or Mechanical activation (lift) for smooth and reliable operation.

Simply pull back the handle and the lip will mechanically lift over the dock height. Then, a slight forward push of the handle will position the lip onto the truck floor.

With a material handling dock leveler from Copperloy, you’ll get more done in less time, and increase your overall capabilities. Learn more about the versatile lineup of edge of dock leveler models we offer by calling 800.321.4968 today.

Fill out the form for more about EODs
Consumer and dealer pricing available.




Equipment Interest:


Edge of Dock Leveler Downloads

EOD Leveler Brochure

EOD Leveler Specifications

EOD Leveler Manual


Each Copperloy edge of dock leveler is smooth and easy to operate. Whether using the handle or the wall-mounted push button (on the hydraulic unit) your EOD extends fully to the height of the trailer bed for safe freight handling. All the benefits of the mechanical system are also available in our hydraulic material handling dock leveler models.

To ensure product durability, the Copperloy EOD leveler has been designed and engineered using a three dimensional engineering software package.

Quick, easy lifting and positioning: Our exclusive lift mechanism and spring assembly sets the board in place with one-quarter the effort needed to operate a conventional edge of dock leveler.

Push button operation on hydraulic models.

Ideal for retrofit: The Copperloy Edge of Dock leveler easily mounts to the face of almost any dock. Transition plates and approach ramps are also available.

Safety: Every Copperloy Edge of Dock Leveler is equipped with a safety maintenance strut to secure the unit while performing routine maintenance.

Low maintenance: Maintenance is reduced to simple lubrication of hinges which come equipped with grease fittings.

Edge of Dock Levelers Specifications

High strength low alloy (50,000 lb. Minimum Yield) tread plate, lip beveled for smooth transition.

Bumpers 16″. Ramp 13 1/2″ in stored position. Lip extends 12 1/2″ beyond bumper.

4″ x 13″ x 10″ molded reinforced rubber mounted to steel box frame. Optional 4″ x 12″ x 13″ bumper assembly

Dual extension springs.

Unit is completely cleaned, deburred and painted gray.

Capable of servicing trucks 5″ above and 5″ below the dock.

20,000 lb. and 30,000 lb.

66″, 72″, 78″, 84″

Consult factory for more information:

  • Refer lip
  • Reduced lip bend
  • In-Board Handle Assembly
  • Hydraulic Model – 115/230 VAC Single Phase

Call Copperloy today at 800.321.4968 or contact us for more about our yard ramps.
Watch Our Video